Documentation

Yousu Documentation Technical Site

Welcome to Yousu's documentation technical site. Here you can find valuable resources created to help you get the most of our products:
  • - General troubleshooting guide
  • - Recommended printing parameters
  • - Slicing profiles


General Troubleshooting Guide

This downloadable PDF guide has been compiled from sources available on the internet and is meant to help to identify the causes of several common 3D printing problems. Most of these problems are related to incorrect printing parameters, the wrong setup of the printer, or printer malfunctions. If your prints are failing or you are not getting the desired quality, look at the index of the guide to identify the problem, and then read the most common causes and solutions.

Download the guide from here.

Slicing profiles and recommended parameters

Here you can find the recommended printing parameters for our printing materials. Click on the material to see the info.

Yousu PLA Yousu Silk PLA Yousu PLA Plus
Yousu PETG Yousu ABS Yousu MABS



Yousu PLA

Recommended Printing Parameters

Hot-end temperature 180 °C - 200 °C
Heated-bed temperature Not necessary / 40 °C
Cooling fan 100%

Slicing profiles

Cura Simplify3D PrusaSlicer



Yousu Silk PLA

Recommended Printing Parameters

Hot-end temperature 180 °C - 200 °C
Heated-bed temperature Not necessary / 40 °C
Cooling fan 100%

Slicing profiles

Cura Simplify3D PrusaSlicer



Yousu PLA Plus

Recommended Printing Parameters

Hot-end temperature 180 °C - 200 °C
Heated-bed temperature Not necessary / 40 °C
Cooling fan 100%

Slicing profiles

Cura Simplify3D PrusaSlicer



Yousu PETG

Recommended Printing Parameters

Hot-end temperature 220°C - 240°C
Heated-bed temperature 70 °C
Cooling fan 100%

Slicing profiles

Cura Simplify3D PrusaSlicer



Yousu ABS

Recommended Printing Parameters

Hot-end temperature 230°C - 250°C
Heated-bed temperature 80 °C
Cooling fan Turned Off

Slicing profiles

Cura Simplify 3D PrusaSlicer



Yousu MABS

Recommended Printing Parameters

Hot-end temperature 230°C - 250°C
Heated-bed temperature 80 °C
Cooling fan Turned Off

Slicing profiles

Cura Simplify 3D PrusaSlicer

Yousu Resin

Recommended Printing Parameters---MONO

Mono Screen
layer thickness(mm) 0.05
Number of bottom layers 6
Number of transition layers 10
transition types line
bottom exposure time(s) 20
exposure time(s) 2
Bottom light off delay(s) 0
light off delay(s) 0
Lifting distance(mm) 5
Lifting speed(mm/min) 65
retraction speed(mm/min) 150


Yousu Resin

Recommended Printing Parameters---RGB

RGB Screen
layer thickness(mm) 0.05
Number of bottom layers 6
Number of transition layers 10
transition types line
bottom exposure time(s) 60
exposure time(s) 8
Bottom light off delay(s) 0
light off delay(s) 0
Lifting distance(mm) 5
Lifting speed(mm/min) 65
retraction speed(mm/min) 150


Yousu Resin

Recommended Printing Parameters---support

support setting
support types middle
touch diameter(mm) 0.8
touch depth(mm) 0.4
connection shape cone
top diameter(mm) 0.4
bottom diameter(mm) 1.2
connection length(mm) 2
cross width(mm) 4
Staggered starting height(mm) 3
density( g/cm3) ≥80
angle(°) 45


All recommended resin printer values are based on the following printer tests:MONO is Anycubic Mono (Screen light intensity5500uW/cm² ),RGB Screen is Anycubic Photon (Screen light intensity1000uW/cm² ).Specific printing parameters need to be fine-tuned according to different printer types.
Copyright © 2013-2021 Guangzhou Yousu 3D Technology Co., Limited. All Rights Reserved.