YOUSU Documentation Technical Site
Welcome to YOUSU's documentation technical site. Here you can find valuable resources created to help you get the most of our products:
- - General troubleshooting guide
- - Recommended printing parameters
- - Slicing profiles
General Troubleshooting Guide
This downloadable PDF guide has been compiled from sources available on the internet and is meant to help to identify the causes of several common 3D printing problems. Most of these problems are related to incorrect printing parameters, the wrong setup of the printer, or printer malfunctions. If your prints are failing or you are not getting the desired quality, look at the index of the guide to identify the problem, and then read the most common causes and solutions.
Printing TIPS
Slicing profiles and recommended parameters
Here you can find the recommended printing parameters for our printing materials. Click on the material to see the info.
YOUSU Wood
Recommended Printing Parameters
Hot-end temperature |
180 °C - 195 °C |
Heated-bed temperature |
40-60 °C |
Cooling fan |
100% |
Slicing profiles
YOUSU PLA
Recommended Printing Parameters
Hot-end temperature |
180 °C - 200 °C |
Heated-bed temperature |
Not necessary / 40 °C |
Cooling fan |
100% |
Slicing profiles
YOUSU Silk PLA
Recommended Printing Parameters
Hot-end temperature |
180 °C - 200 °C |
Heated-bed temperature |
Not necessary / 40 °C |
Cooling fan |
100% |
Slicing profiles
YOUSU PLA Plus
Recommended Printing Parameters
Hot-end temperature |
180 °C - 200 °C |
Heated-bed temperature |
Not necessary / 40 °C |
Cooling fan |
100% |
Slicing profiles
YOUSU PETG
Recommended Printing Parameters
Hot-end temperature |
220°C - 240°C |
Heated-bed temperature |
70 °C |
Cooling fan |
100% |
Slicing profiles
YOUSU ABS
Recommended Printing Parameters
Hot-end temperature |
230°C - 250°C |
Heated-bed temperature |
80 °C |
Cooling fan |
Turned Off |
Slicing profiles
YOUSU MABS
Recommended Printing Parameters
Hot-end temperature |
230°C - 250°C |
Heated-bed temperature |
80 °C |
Cooling fan |
Turned Off |
Slicing profiles
YOUSU Resin
Recommended Printing Parameters---MONO
Mono Screen |
layer thickness(mm) |
0.05 |
Number of bottom layers |
6 |
Number of transition layers |
10 |
transition types |
line |
bottom exposure time(s) |
20 |
exposure time(s) |
2 |
Bottom light off delay(s) |
0 |
light off delay(s) |
0 |
Lifting distance(mm) |
5 |
Lifting speed(mm/min) |
65 |
retraction speed(mm/min) |
150 |
YOUSU Resin
Recommended Printing Parameters---RGB
RGB Screen |
layer thickness(mm) |
0.05 |
Number of bottom layers |
6 |
Number of transition layers |
10 |
transition types |
line |
bottom exposure time(s) |
60 |
exposure time(s) |
8 |
Bottom light off delay(s) |
0 |
light off delay(s) |
0 |
Lifting distance(mm) |
5 |
Lifting speed(mm/min) |
65 |
retraction speed(mm/min) |
150 |
YOUSU Resin
Recommended Printing Parameters---support
support setting |
support types |
middle |
touch diameter(mm) |
0.8 |
touch depth(mm) |
0.4 |
connection shape |
cone |
top diameter(mm) |
0.4 |
bottom diameter(mm) |
1.2 |
connection length(mm) |
2 |
cross width(mm) |
4 |
Staggered starting height(mm) |
3 |
density( g/cm3) |
≥80 |
angle(°) |
45 |
All recommended resin printer values are based on the following printer tests:MONO is Anycubic Mono (Screen light intensity5500uW/cm² ),RGB Screen is Anycubic Photon (Screen light intensity1000uW/cm² ).Specific printing parameters need to be fine-tuned according to different printer types.