| Resin Type: | iForm 184– Dental Mold Resin | |
| Hardness: |
85D
|
|
| Volume Shrinkage: | <1% | |
| Line Shrinkage: | <1% | |
| Density: |
|
|
| Flexure Strength | 75-80Mpa | |
| Extension Strength: | 43-47MP | |
| Elongation at Break: |
14-17%
|
|
| Way to Rinse: | Clean with alcohol spray or IPA and air gun | |
| Suitable for: | LCD/DLP 3D Printer | |
| Application: | Dental |
Storage method
• Keep the resin at room temperature (15 - 35℃) and Sealed storage, the lower the temperature, the higher the viscosity of the resin.
• Keep away from light,seals at room temperature.
Usage
• Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
• Wear gloves to avoid direct contact with the skin and keep the room ventilated.
• Printed models need to use high-concentration alcohol to clean about the 30S (recommended concentration of 95% or higher)
Video
